There have been some issues on the Windows OS that seem like they are an integral part of it and are not going to leave it anywhere. And with the arrival of Windows 11, there have been a number of issues that it has brought in heredity from its predecessor, the Windows 10. One such issue is the high or even 100% disk usage in the Task Manager.
The new Windows 11 may seem to look a whole lot different from Windows 10 but its core is very much similar to its predecessor and hence there is no big deal to solve the Windows 10 related issues on Windows 11 system as well. So here are the 12 working ways to solve the 100% Disk usage in Task Manager on Windows 11 or Windows 10.
How to Fox 100% Disk Usage in Windows
Following are the ways that you can try to calm down your CPU usage. The fixes listed below also include some of the fixes reported by the users themselves along with some issued by Microsoft itself. You can try going through each of them one by one to get the issue resolved. Since the high Disk usage can be due to a number of reasons, there can’t be a single universal fix to it.
Fix 1: Disable SysMain (Superfetch) Service
The SysMain service is used by the Windows OS to preload apps into the system memory to provide a faster app launching experience. But it has been seen that because of this service, the system gets into high disk usage and it makes sense as the service while running in the background, keeps loading the application data into the system memory.
And in the majority of the cases, the users have reported that the SysMain (previously known as Superfetch) service was the reason for the high disk usage. Hence you should consider disabling this service in order to get the disk usage to normalize. To do so:
1. Launch the Windows Run prompt by pressing Win + R on your keyboard, type
service.msc and click OK. This will open the Services window on your system. You can also open Services by simply searching for it.
2. In the Services window, look for the SysMain or Superfetch service, and double-click on it to open its properties window.
3. In the Properties window, change the Startup type to Disabled and click on the Stop button to immediately stop the service. Finally, click on OK.
Doing so will immediately reflect a decrease in disk usage by 10 to 15% in Task Manager. Now, restart your PC and check if the issue is resolved.
Fix 2: Disable “Connected User Experiences and Telemetry” Service
The SysMain service is not the only one that has been seen spiking the disk usage, the “Connected User Experiences and Telemetry” service has also been reported by many as the culprit. This Windows service is used generally to track the diagnostic data and send it to Microsoft. Try disabling this service as well and to do so:
1. Open the Services window either by entering
services.msc the Run prompt (Win + R) you else you can directly search for it.
2. Now, look for the “Connected User Experiences and Telemetry” service and double-click on it to open its properties window.
3. Set the Startup type to Disabled and click on the Stop button to immediately stop the service. Finally, click on OK.
4. Next, I would also advise you to do the same for the “Connected Devices Platform Service” servicer as well. Open its properties, set the Startup type to Disabled and then Stop the service.
Fix 3: Disable the Windows Search service
The Windows Search service is yet another notorious service, experienced by the Windows users cranking up the disk usage on the system. Disabling this service can help in solving the issue but do note that this will affect the searching ability for files and folders in the system. I would advise you to skip this fix if you are not comfortable disabling the Windows Search service. However, if you want to proceed then follow these steps.
1. Search for Services and open it. Alternately you can use the Run prompt (Win + R) to execute the
2. Look for the Windows Search service and double-click on it to open its properties.
3. In the Properties window, set the Startup type to Disabled and then click on the Stop button to halt the service.
4. Finally, click on OK and restart your PC.
Fix 4: Disable startup apps
Startup apps means those apps and programs that automatically start when you boot your PC. You may not be using most of these startup apps actively but if there are a lot of them, they can take up a big chunk of your disk space, which will ultimately slow down your PC. Hence you should make sure to keep the number of startup apps as low as possible. Here’s how you can disable the startup apps on Windows.
1. Open the Windows Task Manager by pressing Ctrl + Shift + Esc on your keyboard.
2. In the Task Manager window, switch to the Startup tab and observe the list of all the apps listed there. If you find an app that you don’t use or need on windows startup, right-click on it and select Disable.
Note: The startup apps’ list may grow bigger as you install more and more app on the system. Hence you should keep checking this list periodically in order to keep the startup apps’ list under control.
Fix 5: Disable Scheduled Defragmentation
In order to improve the performance, Windows periodically performs defragmentation of your PC storage (Hard Disk and SSD). However, while doing so, it increases the disk usage which can reach a max of up to 100%, making the system unresponsive and extremely laggy. To disable the scheduled defragmentation:
1. Search for Defragment and open the Defragment and Optimize Drives app from the search results.
2. On the Optimize drives window, select the drive and click on Change settings.
3. On the next screen, uncheck the Run on a schedule (recommended) option and click on OK. Doing so will disable the scheduled defragmentation of the drive you selected.
4. Do the same for the rest of the drives listed there.
Fix 6: Disable MSI Mode
As per what Microsoft has reported, in some cases, the high disk usage occurs due to the Advanced Host Controller Interface PCI-Express (AHCI PCIe) controllers facing firmware incompatibility. If your Windows PC is using the StorAHCI.sys driver, there are high chances that you’re affected by this issue. And Microsoft has stated that disabling the Message Signaled Interrupter (MSI) mode can drastically reduce the high disk usage. So here is a detailed procedure that you can follow to do so:
1. Open the Device Manager on your Windows PC.
2. Expand the IDE ATA/ATAPI controllers section and go to the Properties of the AHCI Controller device listed there by right-clicking on it.
3. On the Properties window, switch to the Drivers tab and click on Driver Details.
4. If you find the driver file as storahci.sys then proceed to the next step. Otherwise, you don’t need to do anything further as this fix is not applicable to your PC.
4. Come back to the properties window, switch to the Details tab, and change the Property to Device instance path. Now, copy the path from the Value section.
5. Paste the copied path in a notepad file as we’ll need it later in the process.
6. Open the Registry Editor on your PC. You can either simply search for it or can run the services
regedit command in the Run prompt (Win + R).
7. In the Registry Editor window, navigate to the following path:
You can also directly paste this path into the address bar of the window.
8. Now look for the entry that goes by the name we pasted in the notepad file and expand it.
9. Keep expanding the subkeys until you reach the path of Device Parameters > Interrupt Manager > MessageSignaledInterruptProperties.
10. Once you are in the MessageSignaledInterruptProperties folder, come to the screen on the right and double-click on the MSISupported registry value.
11. Edit its Value data to “0” and click on OK.
Once done, close all the windows and restart your PC. And upon restart, you should be able to see the disk usage in a normal range of 10-20% when the PC is idle.
Fix 7: Reset Virtual Memory
If your system has a limited amount of RAM in comparison to the amount of load you put on it, the Windows can take your hard disk in use as a swap to place the programs’ temporary data. However, there can be instances where the PC starts using a big chunk of the storage, rising the disk usage to 100%. To avoid this from happening, you can reset the virtual memory. It is also advised to increase the RAM capacity on your system to get a permanent solution in such a case.
1. Open the Run prompt by pressing Win + R and run the
sysdm.cpl command to open the System Properties window on your PC.
2. Switch to the Advanced tab and click on the Settings option of the Performance section.
3. Again switch to the Advanced tab and now, click on Change… located under the Virtual memory section.
4. Uncheck the Automatically manage paging file size for all drives option and select the Custom size option.
5. Enter the Initial size with the Recommended one as provided in the Total paging file size for all drives section and in the Maximum size option, enter the 1.5 times if the recommended value.
6. Click on Set and then on OK.
Fix 8: Try disabling the Background apps
Limiting the number of background apps helps a lot in making the performance of the Windows snappier. It is also a good practice to keep the hardware resource usage under regulation. Hence if you are having an unusually high disk usage then you should pay attention to the background apps as well. Here’s how to disable the non-essential background apps on Windows 11.
1. Open Windows Settings by pressing Win + I on the keyboard and go to Accounts > Sign-in options.
2. Disable the Automatically save my restartable apps and restart them when I sign back in option.
3. Now head over to Apps from the left pane and go to Apps & features. Here, you’ll get a list of all the installed apps.
4. Click on the three-dot menu next to the app and go to the Advanced options for the app that you want to disable from running in the background.
5. Scroll down to the Background apps permissions section and set the Let this app run in background option to Never.
6. Repeat steps 4 and 5 for all the unnecessary apps you want to disable from running in the background.
Fix 9: Run the Disk Check Scan
Windows offers a built-in scanning utility to check disk health. If the system disk is suffering from some kind of logical errors or bad sectors, the Disk Check Scan helps you in such a case. Here’s how to run the Disk Check Scan on Windows.
1. Search and open Command Prompt with administrator rights.
2. In the Command Prompt window, run the following command:
chkdsk /r c:
3. Upon running the command, it will ask whether you want to run a disk check on the next restart. Type Y followed by an Enter to confirm the scan.
4. Now, restart your PC and Windows will start checking for all the logical errors and bad sectors of the disk and will fix them.
Fix 10: Scan for viruses/Malware
This is very much likely that the high disk usage is happening due to some unwanted foreign substances in the Windows OS. These hidden malware/ virus programs can easily cause the disk usage to reach 100%. Hence it is advised to run a thorough system scan and remove the malware or virus if any are found.
You can use Windows’ built-in Virus & threat protection feature to scan the PC or you can go with a reliable 3rd-party anti-virus program like Norton, Avira, Malwarebytes, etc. To use the Windows Virus & threat protection:
1. Open Settings by pressing Win + I key combination on the keyboard.
2. Navigate to Privacy & security > Windows Security.
3. Click on the Open Windows Security button.
4. On the Windows Security window, select Virus & threat protection.
5. Click on the Scan options located right below the Quick scan button. You can also run the Quick scan if you want, prior to the full scan.
6. Select the Full Scan from the list and hit the Scan now button.
Let Windows scan the system and if there is any threat (virus/malware) found, treat it accordingly i.e. remove it and see if the issue is fixed or not.
Fix 11: Update/Reinstall Storage drivers
The faulty or outdated drives can cause the disk to be used very extensively for no reason. Hence you should make sure that you are having the latest storage drivers installed. Also if there is no driver update available, consider reinstalling the current once just to be sure. To do so:
1. Search and open the Device Manager on your PC.
2. Click on the Disk drives section to expand it.
3. Right-click on the Storage device and select Update Driver.
4. Click on Search automatically for drivers option on the Update drivers window.
5. Let the Windows search for the latest drivers. If it is available, then follow the on-screen instructions to install it.
6. If there is no update available, then again right-click on that Storage device and select Uninstall device.
7. Again click on Uninstall to confirm the selection and restart the PC. Upon restart, the PC will automatically reinstall the uninstalled drivers.
8. Do the same process with the devices listed under the IDE ATA/ATAPI controllers section.
Fix 12: Update/Reinstall Windows
Lastly, if you are having a lot of pending Windows updates, please consider finishing them up by installing them. Be them the major Windows updates or the Optional updates, install them all. To install the updates:
Installing the optional windows updates
1. Open Windows Settings.
2. Navigate to Windows update > Advanced options.
3. Click on Optional Updates, located under the Additional options section.
4. Now, checkmark the available updates and click on Download & Install to begin the installation of the available optional updates.
Installing the Windows major updates
1. Open Windows Settings (Win + I).
2. Go to Windows Update and click on Check for updates.
3. If there are pending updates found, then download and install them accordingly and finally restart the PC.
After installing all the pending updates, leave the PC idle for an hour or so and check if the disk usage is not in the normal range or not. If not, then the very last option is to perform a clean re-install of Windows. You can re-install windows by using a USB stick and this process will only erase the data that is available in your C drive. Hence you can backup tour important data from the C drive. The rest of the drives will not be touched in the process. Here is a complete guide from Techadvisor on how to install Windows 11 using a USB drive. You can follow this guide or can ask a professional technician to do so for you.
Here comes the end of this fixing guide and these are all the different ways that you can use to get the high disk usage under control. Besides following the aforementioned fixes, you should also consider switching to an SSD storage if you are not having one already on your system. SSD storage offers much faster storage speed and better performance that can also help you a lot in keeping the disk usage under control. That’s all that I had for you guys in this one. If you have some more fixes that you think are worth mentioning here, please feel free to share them in the comments below.
- How to Fix God Of War D3D Error (D3D_Feature_Level_11_1)
- How to fix Minecraft Bedrock pink textures/blocks glitch
- Fix: Wi-Fi Not Showing Up In Windows 11/10
- How to Uninstall Explorer Patcher from Windows 11
- Fix Invalid Value for Registry (JPG, JPEG, PNG, MP4, MP3) on Windows 11/10
- WaasMedicAgent.exe Explained & How to Fix its High Disk/CPU Usage
- How to Run Device Manager as Admin [CMD, PowerShell & Run]
- Fix DRIVER_IRQL_NOT_LESS_OR_EQUAL on Windows 11/10
- Fix nvlddmkm.sys failed BSOD error on Windows 11/10
- Fix: Currently, this hardware device is not connected to the computer. (Code 45) on Windows 11/10