How to Fix a Stuck Battery Percentage on Android, iOS

If you’ve ever noticed that your battery is stuck at a certain percentage, you may be wondering how to fix this problem. There are several possible causes for the issue, but one of them is the battery. If your phone’s battery is old, it’s most likely that you’ll see the percentage show up as too low.

Older batteries just can’t hold as much charge as newer ones, and this software doesn’t take this into account.

Why is my phone battery stuck at a certain percentage?

1. Software Bug

This issue has been reported by many Pixel 5 users, and a Google product expert has confirmed that it is indeed a bug. Hopefully, a future Android update will fix it. Until then, you can solve the problem temporarily by restarting the phone and plugging it into a charging station.

Alternatively, you can download the latest Android update to your phone. Then, follow the steps outlined above to fix the issue.

If you cannot figure out why the battery percentage is stuck at 99% or something, you may have a faulty battery sensor. In such a case, it’s best to reset the device by holding the power and volume buttons together. You should then see a robot on the screen. Press the volume rocker again until you reach recovery mode.

2. Faulty Charger

If the problem persists, you might need to try a different charger or the phone’s software may have a bug. If all these fail, you should try updating the firmware of your phone.

3. Faulty Battery Meter

Other possible causes include a defective battery meter. Moreover, a battery degrades over time. This means that the battery’s sensors cannot detect the degraded state. As a result, a battery that was once at 90% could suddenly drop to 80% and stay there for a long time.

In such cases, the device’s battery percentage will be stuck at the same percentage, and it will slow down its smooth functioning.

4. Hardware issue

If the battery percentage indicator on your Android phone is stuck at a specific percentage, the problem may be caused by the logic board IC, which is located in the battery. This chip handles the charging circuit, battery management, and accessory communication. Aftermarket cables may have damaged the IC.

However, if you have access to tools and micro-soldering skills, you can repair this issue. If the percentage indicator is still stuck at 100 percent, you can re-calibrate the battery sensor software by charging your phone until it shows a full charge.

How to Fix the Stuck Battery Percentage on Android

1. Re-enable Battery percentage

When you’re using an Android smartphone, the percentage displayed on the battery icon is most likely displaying a low battery.

To remove the battery indicator, open the settings menu and tap on Battery. There, you’ll find an entry called “Battery percentage” in the battery management section. By default, the battery percentage appears in the status bar, but you can turn it off.

When it’s off, the battery icon will replace the percentage.

2. Restart your Phone

The battery percentage displayed on your phone is an estimate and is determined by the battery’s response to variations in load. To reset it, restart your phone.

By restarting the device, you’ll reset the battery’s response history and reset the battery’s remaining estimate. The next time your phone shows a low battery percentage, restart it. Once it’s up and running, the battery will re-calibrate to its correct state.

3. Recalibrate your Battery

It is possible that the calibration of your battery and firmware has gone out of sync for some reason. In that case, you should consider recalibrating it.

1. Discharge the phone completely until it shuts down and the battery is drained entirely.

2. Turn it back on and wait for it to turn off again by itself.

3.  Once the phone is off, plug it into a power source without turning it on and charge it until the on-screen indicator displays 100%.

4. Now, disconnect your device from the charger, turn on your device, and if the battery percentage is not at 100%, reconnect the charger until the phone UI displays a full 100% battery.

5. Unplug your phone and restart it. If the battery is still not at 100%, plug it in and charge it until it reaches 100%.

6. Repeat this process until it reaches 100% in the system UI.

7. Now, discharge your battery until your phone turns off automatically.

8. Lastly, fully charge the battery one last time. Do not turn on the device or interrupt the charging.

After calibrating the battery, wait for the phone to boot. You should now be using your phone normally.

You don’t have to repeat the process as often as you think necessary. Just remember to keep the battery charged and to charge it properly at least twice a year.

4. Replace the battery

Don’t forget to replace the battery if needed. If you’re not sure about your battery, try calibrating the battery every few months. Or, the best thing is to consult a technician who can troubleshoot the battery-related issue on your phone.

Why is my phone stuck at 80% while charging?

There are several reasons why your iPhone battery may not be able to charge past 80%, including the environment and prolonged use, which can put stress on your battery. To prevent this, Apple designed the iPhone to stop charging at 80% when necessary.

Depending on the cause, the problem could be related to either the temperature or the charger. If it’s the charger, the problem may be resolved by using a different charger. Here are some possible solutions to this issue.

One possible reason why your phone won’t charge past 80% is if it’s left plugged in for extended periods. This could be due to a new feature called “Optimized Battery Charging” introduced in iOS 13.

This feature prevents or delays charging at 80% when your phone is not in use. Make sure to check the settings for this feature and disable it if necessary.

How Can I Reset My Android Battery?

If you want to reset your Android battery percentage, you can use an option in the Android system that resets the battery percentage when the phone is switched off.

To do this, download and install the free Battery Calibration application from the Google Play Store, and then restart your phone. Once the device is restarted, open the Battery Calibration application and wait until the battery meter reaches 100%.

Then, unplug your phone from the charger, and you can use it as normal. It’s not necessary to perform this calibration every time your battery is low – just be mindful about charging your battery, so it doesn’t get too low.

How Can I Reset My Battery?

You can charge your phone and turn it off to reset the battery percentage. However, this method may be a bit tedious.

Your smartphone’s battery has a smart chip embedded in it that sends a signal to the operating system. When you restart your device, it attempts to read this signal and determine how much power is stored, eventually leading to a decrease in battery capacity.

This process is easy but requires patience. Here are some steps to reset your battery percentage on an Android smartphone:

Open the Battery settings on your device and check the battery icon and estimated battery life. You can also disable the battery percentage and re-enable it after a restart.

How Do I Stop My Battery From Draining So Fast?

First and foremost, adjusting your phone’s screen brightness can significantly reduce battery drain. Check your phone’s settings and lower the brightness to a level that’s comfortable for you.

It’s also essential to keep your phone updated with the latest software and bug fixes. Software updates often contain improvements that can reduce battery consumption.

In addition to these methods, taking care of your battery’s health can help extend its lifespan. Charge your phone as needed, but avoid leaving it plugged in for extended periods, as overcharging can cause damage.

You can also set your screen timeout to one minute to help conserve battery life. This will ensure that the screen turns off when you’re not actively using your phone.

If none of these solutions work, restoring your phone to its factory settings may help. Keep in mind that this will erase all data and apps, so be sure to back up your phone beforehand. It’s always a good idea to update your Android software first, as this may fix the issue without the need for a factory reset.

Also Read:

Rate this post
Posted by
Bhanu Pratap

Hi! I am Bhanu Pratap, co-founder of Yorker Media Group. A die-heart fan of tech and keeps track of every little happening of the same. When not writing, I usually keep myself busy on YouTube making and exploring new and awesome tech content.

Leave a Reply

Your email address will not be published. Required fields are marked *