Valorant, a popular first-person shooter game, has attracted a large following of players worldwide. However, the release of Windows 11 has caused many players to encounter a common error, the VAN9003 error. This error states that “This build of Vanguard is out of compliance with current system settings.”
If you are one of the many players who have encountered this error, do not worry. We have put together a step-by-step guide to help you fix the VAN9003 error in Valorant on Windows 11.
Why you are getting the “This build of Vanguard is out of compliance with current system settings.” error
Valorant’s anti-cheat system requires a secure and safe system to run properly, so when Secure Boot is not enabled on your Windows 11 PC, the “This build of Vanguard is out of compliance” error will occur.
Secure Boot and TPM are security features that allow programs to run with a higher level of safety and trust. This is why Valorant relies heavily on them.
Attention Windows Users!!
Facing issues on your Windows PC every now and then? We would recommend you use the Restoro PC Repair tool.
It is a one-stop solution to repair common computer errors, protect your Windows PC from data loss, malware, hardware failure, Registry issues, BSOD errors, etc. and optimize your PC for maximum performance in just three simple steps:
- Download Restoro Tool that comes with Patented Technologies (see patents here).
- Install and click on Start Scan to find the issues on your Windows PC.
- Finally, click on Repair All to fix the issues.
4,533,876 users have downloaded Restoro till now.
Fix “This build of Vanguard is out of compliance with current system settings.”
To fix the VAN9003 error in Valorant, you need to enable Secure Boot on your Windows 11 PC. Here’s how:
1. You are first required to boot into the BIOS for your Motherboard. To boot into the BIOS, restart the PC and press the BIOS hotkey while the PC is turning on.
Now, this BIOS hotkey may differ depending on the manufacturer of your PC’s motherboard. Check the list below to know the BIOS hotkey for your PC.
- BIOS Hotkey for HP laptops: F10 or Esc
- BIOS Hotkey for Asus laptops: F2
- BIOS Hotkey for Dell laptops: F2 or F12
- BIOS Hotkey for Acer laptops: F2 or DEL
- BIOS Hotkey for Lenovo laptops: F2 or Fn + F2
- BIOS Hotkey for Samsung laptops: F2
- BIOS Hotkey for Sony laptops: F1, F2, or F3
- BIOS Hotkey for Toshiba laptops: F2
- BIOS Hotkey for Xiaomi laptops: F9 or F12
- BIOS Hotkey for Realme laptops: F2
- BIOS Hotkey for Asus motherboards: F2 or DEL
- BIOS Hotkey for MSI motherboards: DEL
- BIOS Hotkey for Gigabyte motherboards: DEL
- BIOS Hotkey for ASRock motherboards: F2
- BIOS Hotkey for Zebronics motherboards: F2
2. Once you are into the BIOS of your Windows PC, navigate to the “Security” or “System Configuration” or “Boot” section depending on your motherboard manufacturer’s BIOS layout.
3. Here, you’ll see the Secure Boot option. Navigate to it and set it to Enabled. Once the Secure Boot is enabled, save the changes and restart your PC.
4. Once the PC is restarted, check if the Secure Boot is successfully enabled or not. To check it, open the Run dialog box by pressing Win + R on your keyboard and type in msinfo32, and press enter.
5. This will open up the System Information window. Click on System Summary from the left pane and check the status of the Secure Boot Mode from the right. If it shows On then the Secure Boot is enabled for your Windows 11 PC.
Now, launch Valorant and see if the issue is fixed or not.
Is secure Boot Still Not Enabled?
In some motherboards like MSI or Gigabyte, there is kind of a BIOS glitch due to which the Secure Boot gets enabled but it also shows Not Active. In that case, you are required to follow a couple of more steps as described below.
1. Boot into BIOS, navigate to the Boot section, and set Boot Mode to UEFI.
2. Thereafter, navigate to Secure Boot and disable it.
3. Once disabled, the Secure Boot Settings. For my MSI Motherboard, it is in Settings > Advanced > Windows OS Configuration > Secure Boot.
4. Here, set the Secure Boot Mode to Custom.
5. Now, without saving the changes, change the Secure Boot Mode again to Standard.
6. This will result in BIOS asking you to reset the Secure Boot Mode to the factory default. Confirm by selecting Yes.
7. Your PC will now shut down. Boot your PC again into BIOS and finally enable the Secure Boot we just Disabled.
And by following the above steps carefully, you should be able to see the Secure Boot Mode to On in the System Information window of your PC.
Why is the Secure Boot option missing in my BIOS?
If you are not able to see the Secure Boot option in the computer BIOS then it may be becausE of the CSM being enabled. CSM stands for Compatibility Support Module that lets your UEFI system boot in legacy BIOS.
In order to enable or disable Secure Boot, you are first required to disable CSM. The process to disable may vary depending on your motherboard manufacturer.
You can refer to the list below to find out where you’ll get the CSM option for some popular motherboards.
Asus Motherboard: Boot > CMS > CMS Launch.
Gigabyte Motherboard: Boot into BIOS, go to BIOS or Security and there you’ll see the CMS option.
ASRock Motherboard: BIOS > Boot > CMS.
MSI Motherboard: Boot into BIOS, go to the Boot tab, and then go to the Boot mode select section and select UEFI only. This will disable CMS automatically.
Why is Secure Boot Greyed Out in my BIOS?
If you are able to see the Secure Boot option but it is greyed out or unselectable, you are needed to set the Administrator Password for your BIOS first. As this is the Admin passcode, you will need it every time you boot into the BIOS. To set the administrator password (also known as Supervisor Password) for your BIOS:
1. Boot into the BIOS of your PC and navigate to the Security tab.
2. Under the Security tab, look for the Administrator Password or Supervisor Password and select it.
3. Now, enter the password that you want to set and you are done.
Once the Administrator password is set successfully, you should now be able to enable or disable the Secure Boot in your BIOS.
Additional fixes to resolve the VAN9003 (This build of Vanguard is out of compliance with current system settings.) Error
Here are the steps on how to fix the Valorant VAN9003 Error on Windows 11:
Update to the latest version of the Vanguard anti-cheat software.
Go to the Vanguard website and download the latest version of the software. Once the download is complete, run the installer and follow the on-screen instructions.
Update to the latest version of Windows 11.
Go to the Windows website and download the latest version of the operating system. Once the download is complete, install the update and follow the on-screen instructions.
Restart your computer.
Once you have updated both Vanguard and Windows 11, restart your computer. This will allow the new software to take effect.
Contact Riot Games support for further assistance.
If you are still having problems, contact Riot Games support for further assistance. They will be able to help you troubleshoot the issue and find a solution.
Frequently Asked Questions (FAQs)
What is the VAN9003 error?
The VAN9003 error is an error that occurs when the Vanguard anti-cheat software is not compatible with the Windows 11 operating system.
What causes the VAN9003 error?
The VAN9003 error can be caused by a number of things, including
outdated Vanguard anti-cheat software, interference from the Windows Firewall, a problem with the Vanguard anti-cheat itself, etc.
How do I fix the VAN9003 error?
There are a few things that you can do to try to fix the VAN9003 error e.g.
update to the latest version of the Vanguard anti-cheat software, update to the latest version of Windows 11, restart your computer, contact Riot Games support for further assistance, etc.
How can I prevent the VAN9003 error from happening again?
There are a few things that you can do to try to prevent the VAN9003 error from happening again. The precautions include keeping your Vanguard anti-cheat software up to date, keeping your Windows 11 operating system up to date, and restarting your computer regularly. If nothing works, then contact Riot Games support if you have any questions or problems.
What are some other common Valorant errors?
Some other common Valorant errors include the VAN9001 error, which occurs when Vanguard is not installed or is not running properly, the VAN9002 error which occurs when Vanguard is unable to connect to the internet, the VAN9004 error which occurs when Vanguard is unable to update itself.
How can I fix other Valorant errors?
There are a few things that you can do to try to fix other Valorant errors e.g. check if Vanguard is installed and running properly, check if Vanguard is able to connect to the internet, and check if Vanguard is able to update itself. lately, contact Riot Games support if you have any questions or problems.
And there you go! This is how you can solve the Valorant VAN9003 error that says “This build of Vanguard is out of compliance with current system settings.” I hope this guide was successful in resolving your issue. If you have any problem or query related to the fixing guide or error, please feel free to share it with us in the comments below.