6 Ways to Fix CPU Fan Error on Boot in Windows 11, 10

Adding a variety of cooling fans to your PC casing is possible, but the CPU fan is essential and irreplaceable. That’s why it’s hard to ignore the CPU fan error that some users keep getting during boot. This error typically indicates a malfunction of the CPU fan or underperforming RPM. We have some tips for resolving this error without too much hassle. Check them out below.

Why does my BIOS say CPU fan error?

An error that occurs at startup caused by the central processing unit (CPU) fan is usually the result of physical damage to the fan itself, faulty settings, or external circumstances that cause the computer to overheat and force the fan to spin at exceptionally high speeds.

Alternatively, errors with the computer’s CPU fan may be brought on by dirt or other debris that obstructs the device’s air vents.

Attention Windows Users!!

Facing issues on your Windows PC every now and then? We would recommend you use the Restoro PC Repair tool.

It is a one-stop solution to repair common computer errors, protect your Windows PC from data loss, malware, hardware failure, Registry issues, BSOD errors, etc. and optimize your PC for maximum performance in just three simple steps:

  • Download Restoro Tool that comes with Patented Technologies (see patents here).
  • Install and click on Start Scan to find the issues on your Windows PC.
  • Finally, click on Repair All to fix the issues.

4,533,876 users have downloaded Restoro till now.

Fix CPU fan speed error

Before moving on to more complex solutions, make sure to do the following:

  • Remove the fan and clean the dust. You can use pressurized air to clean it.
  • Move your PC to get adequate ventilation
  • Disable overclocking and custom fan curves
  • To reduce the CPU temperatures, re-apply the thermal paste.
  • If you installed an AIO liquid CPU cooler, check to see that the Pump was plugged into the AIO 3. PUMP port and that the AIO Radiator Fans were plugged into the CPU FAN port.
  • Check to see that the CPU cooler is correctly attached to the motherboard and that the fan of the CPU cooler is specifically hooked into the CPU FAN header.

1. Update PC BIOS

Access your BIOS and update the firmware of your Windows PC to more likely fix the CPU fan error on boot.

1. Download the latest BIOS version from your motherboard manufacturer’s website and copy it onto a USB flash drive.

2. Open the Start Menu, then click the Power button. Hold the Shift key and choose the Restart option.

3. Several options will appear. Choose Troubleshoot, followed by Advanced options.

003 advanced options

4. Select UEFI Firmware Settings.

5. Click the Restart button, and your computer should now boot to BIOS.

uefi firmware settings restart

Once you enter BIOS, look for the BIOS update option and select it.

2. Lower the default fan RPM in BIOS

To fix the CPU fan speed error detected boot into BIOS on your PC.

1. Navigate to CPU Fan settings. The sections might differ based on your motherboard.

The important thing is to look for anything related to the CPU Fan control, usually found in the Advanced settings menu.

Now, locate the setting that regulates RPM warnings. The default value should be around 550 or 600 RPM (rotations per minute).

2. Lower the default value to 350 RPM and save changes.

3. Exit BIOS and boot into the system. This is one of the best solutions for the Asus motherboard CPU fan error.

3. Disable CPU Fan speed monitoring in BIOS

1. Boot into BIOS. Navigate to the aforementioned Advanced settings.

2. Look for the Monitoring (Monitor) section.

3. Change the CPU Fan Speed to Ignore and confirm changes.

4. Boot into Windows and look for improvements.

After that, the CPU fan press F1 error should be gone. However, if the issue persists, take your PC for diagnostics and repair.

4. Replace the CPU fan header

In some cases, your PC might have more than one CPU fan header. If you face the CPU fan error, it might be because the header you are using is faulty.

The best thing to do in this case is to try another header. Also, ensure the fan is connected to the correct location (i.e., the fan header).

5. Test Other CPU Fans

It is imperative to ensure that your CPU fan is functioning appropriately. One way to check this is by testing other fans that are compatible with your PC.

When doing so, ensure that the fan is correctly connected to the header and that the surrounding area is adequately ventilated.

6. Replace the CPU Fan

If the solutions mentioned above fail to address the CPU fan error, it might be time to consider replacing the fan. This is particularly true if other fans were tested, and they worked without any issues.

When replacing the CPU fan, ensure that the fan is compatible with your PC and that the connection is appropriately secured.

What will happen if the CPU fan stops working?

If the fan of a central processing unit (CPU) is dead, it can lead to overheating. When a computer’s CPU becomes excessively hot, it activates the built-in safeguards to either slow down or shut down the system to avoid any possible explosions.

However, in case these protections do not work as intended or take too long to kick in, the CPU may surpass its maximum temperature limit and cause permanent damage to the system.

On the other hand, you can replace the malfunctioning fan, which is not a complicated process. Has our article aided you in resolving the Asus water-cooling CPU fan error? We would appreciate it if you could leave a comment below and let us know.

Also Read:

Rate this post
Posted by
Bhanu Pratap

Hi! I am Bhanu Pratap, co-founder of Yorker Media Group. A die-heart fan of tech and keeps track of every little happening of the same. When not writing, I usually keep myself busy on YouTube making and exploring new and awesome tech content.

Leave a Reply

Your email address will not be published. Required fields are marked *